4.14
Based on 35 reviews
Write Review
Sort
Clear Filters
Order By
Newest First
Oldest First
Most Popular
Highest Rating
Breakdown
22
4
4
2
3
Product Reviews
Questions
Antenna Bar Mount for Horizontal Bar 1.8" Inch
Fit perfect, works great.
Was this review helpful?
2 months ago
Antenna Bar Mount for Horizontal Bar 2" Inch
Doesn't hold firmly to bar, just a couple bumps and slips down. Had to tape in place so as to finish the ride.
Was this review helpful?
2 months ago
Antenna Bar Mount for Horizontal Bar 2" Inch
Just got the products installed. I won't be using anything until the weather get nicer in June
Was this review helpful?
3 months ago
Antenna Bar Mount for Horizontal Bar 2" Inch
Fit my Can-am Maverick R perfect
Was this review helpful?
5 months ago
Antenna Bar Mount for Horizontal Bar 1.75" Inch
Looks great and very nice quality.
My only complaint is that even after I tightened it it still moved. I wrapped tape around the bar and fixed the problem. Not a big deal at all
Was this review helpful?
8 months ago
Antenna Bar Mount for Horizontal Bar 2" Inch
Fits well and provides good reception
Was this review helpful?
10 months ago
Antenna Bar Mount for Horizontal Bar 1.8" Inch
You need the part of the mount for the correct for the antenna nut to screw on to the coax cable. But ended up grinding out one side for the cable. I also ended up making my own bracket to attach to my machine out of 1-1/2 x 1-1/2 angle aluminum as there was no place I could use the 1.8 clamp because of the limited amount of adjustment. So I used half of the mount and spent a lot of time figuring out how and where I was going to mount the antenna. Could have been much easier if the mount had angle adjustment like a Tusk mount.
Reply:
Thank you for your feedback. We apologize for the inconvenience you experienced and appreciate your suggestion about adding angle adjustment. Your input is invaluable, and we're always looking to improve our products.
Was this review helpful?
10 months ago
Antenna Bar Mount for Horizontal Bar 1.75" Inch
It won't tighten up I had to install rubber between clamp and bar
Was this review helpful?
11 months ago
1
2
3
4
5
New content loaded